Division Of Grid Fiber Tape
Apr 07 , 2020

The division of mesh fiber tape is mainly based on the aperture of the mesh belt


The division of the outer wall grid zone is mainly based on the holes of the grid zone. It can be divided according to the number of meshes, that is, how many grids are in a square meter. The smaller the holes, the more expensive the mesh belt, so we can think that the larger the mesh number, the better the quality of the mesh belt.


In addition, we can divide the grid zone according to the size of the holes, that is, the size of the holes can also be used as a basis for division.


We can also choose according to our needs when selecting the mesh belt. For example, when we use it on some screens, we need to choose a relatively thin glass fiber mesh belt and use it in the insulation layer of the building's exterior wall At this time, the choice of grid zone should be slightly larger.


The shaping of the large-eye mesh belt is a difficult point in the production of this alkali-resistant mesh belt, and it is also the reason why the price of this mesh belt is relatively high. In the mesh belt production process, the same shape, the smaller the eyelet specifications, the easier the shape. The large-eye mesh belt can be said to be the most difficult to shape among the mesh belt products. Ordinary mesh belts are shaped by uniformly coating a layer of glue during the production process, and drying and shaping the glue after a high-temperature baking oven. This effect and quality will be very good and can meet various needs. When the large-eye mesh belt is shaped, after one side is glued and baked, the setting effect is not satisfactory, so a second pass of gluing and baking is performed, which is equivalent to two passes of the manufacturing process and Glue and heating cost output. The styling effect will reach the ideal requirements after two treatments, but the cost will increase accordingly. PET high-temperature resistant tape


The division of the outer wall grid zone is mainly based on the holes of the grid zone. It can be divided according to the number of meshes, that is, how many grids are in a square meter. The smaller the holes, the more expensive the mesh belt, so we can think that the larger the mesh number, the better the quality of the mesh belt.


In addition, we can divide the grid zone according to the size of the holes, that is, the size of the holes can also be used as a basis for division.


We can also choose according to our needs when selecting the mesh belt. For example, when we use it on some screens, we need to choose a relatively thin glass fiber mesh belt and use it in the insulation layer of the building's exterior wall At this time, the choice of grid zone should be slightly larger.


The shaping of the large-eye mesh belt is a difficult point in the production of this alkali-resistant mesh belt, and it is also the reason why the price of this mesh belt is relatively high. In the mesh belt production process, the same shape, the smaller the eyelet specifications, the easier the shape. The large-eye mesh belt can be said to be the most difficult to shape among the mesh belt products. Ordinary mesh belts are shaped by uniformly coating a layer of glue during the production process, and drying and shaping the glue after a high-temperature baking oven. This effect and quality will be very good and can meet various needs. When the large-eye mesh belt is shaped, after one side is glued and baked, the setting effect is not satisfactory, so a second pass of gluing and baking is performed, which is equivalent to two passes of the manufacturing process and Glue and heating cost output. The styling effect will reach the ideal requirements after two treatments, but the cost will increase accordingly. PET high-temperature resistant tape



Send A Message
Welcome to Jialong
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact