JLN-3140 Reinforced Water Activated Tape

JLN -3140 reinforced water activated tape is a specialized packaging solution for sustainable logistics. The product utilizes non polluting backing materials and natural adhesives. This tape serves as an alternative to traditional plastic tapes in high performance industrial environments.

Product Features

High Performance Tensile Strength Specifications

Reinforced water activated tape utilizes high density fiberglass filaments. Structural integrity for cartons is the primary benefit. 

Sustainable Material Compliance for Developed Markets

The tape is manufactured from 100 percent virgin kraft paper and bio based starch adhesives. Environmental sustainability is the core value proposition. This product satisfies the plastic reduction mandates in the European Union and North America. Full recyclability is possible within existing cardboard processing streams. Users do not need to separate the tape from the box before recycling.

Advanced Tamper Evident Security Features

Water activated adhesive creates a molecular bond with corrugated fibers. Total box security is the resulting outcome. Any attempt to remove the tape will result in permanent visible damage to the surface. This feature acts as a deterrent against unauthorized access during the logistics cycle. The seal remains stable under extreme temperature fluctuations.

Ergonomic Application and Operational Efficiency

The starch adhesive requires hydration for activation. Operational consistency is achieved through the use of manual or electric dispensers. This method ensures that the exact amount of tape is used for every carton. Waste reduction is a direct consequence of this controlled application. The tape bonds instantly to dusty or recycled surfaces where plastic tapes often fail.

TECHNICAL PERFORMANCE DATA

Product application scenarios

Physical Properties	Standard	Metric	Test Method
Composite Layer Adhesive	Polymeric Copolymer
Adhesive Type	Starch Adhesive
Total Thickness	5.5 mils	0.14 mm	ASTM D-3652 / GB/T7125
Tensile Strength (MD)	57 lbs/in	255 N/25mm	ASTM D-3759 / GB/T7753
Tensile Strength (CD)	22 lbs/in	100 N/25mm	ASTM D-3759 / GB/T7753
Reinforcement (MD)	(1-1-1-1) G110 Fiberglass per 72mm
Reinforcement (CD)	(1-1-1-1) G150 Fiberglass, 1" spacing, 45 degree angle
Backing (Top Ply)	25 lb (40 g/m2) Brown Kraft Paper (Virgin)
Backing (Bottom Ply)	25 lb (40 g/m2) Brown Kraft Paper (Virgin)