Running a packaging line often comes down to matching tape construction to box weight and throughput speed. The JLN-2740H fits into our product range as a light duty, non-reinforced self-adhesive option designed specifically for standard corrugated cartons. Unlike water-activated systems that rely on starch and moisture penetration, this model uses a hot melt adhesive that bonds immediately upon contact with the cardboard surface.
The backing consists of 70gsm kraft paper with a total thickness of 0.125mm. We specify this weight because it provides enough puncture resistance for typical e-commerce and retail boxes without adding unnecessary bulk or cost. The hot melt coating is applied at a controlled rate to achieve a peel adhesion of 21N per 25mm. Tensile strength sits at 90 N/25mm in the machine direction (cross-direction tensile is not specified in the TDS), which aligns well with light-duty packages.
From a workflow perspective, the absence of fiberglass reinforcement means the tape tears cleanly by hand or with a standard cutter, reducing blade wear on dispensing equipment. It feeds reliably through both handheld guns and automated case sealers, available in 38/48/76 mm widths. Operators typically choose this grade when sealing uniform carton sizes at moderate speeds, where tamper-evidence is less critical than consistent application and clean edge finishing.
The adhesive system maintains reliable tack between -5°C and 60°C. In humid or cold warehouse conditions, hot melt formulations like this one avoid the drying delays associated with water-activated tapes. Because the backing is pure kraft paper and the adhesive leaves minimal residue, the kraft-paper backing can enter standard recycling streams; check repulpability of the hot-melt adhesive with your recycler.
We position the JLN-2740H as a direct alternative to standard BOPP tape for facilities prioritizing material consistency and recyclability. It works best for lightweight shipments, internal part transfers, and retail-ready packaging where surface smoothness matters. For heavier loads or high-stress transit routes, moving to our reinforced self-adhesive grade JLN-28160 (fiberglass, 45 lbs/in) would be the logical next step. The selection ultimately depends on your box flute rating, stacking height, and whether manual or automated sealing drives your daily output.